case
ADM Blog
17Apr/090

Install Windows XP on your Asus Eee PC using a USB flash drive

This method of running and installing a Windows from a USB flash drive works on all computers not just Asus Eee PC's.

To complete this tutorial you'll need:

- a 32bit version of Windows XP or Windows Vista installed on your computer

- USB_PREP8

- PeToUSB

- Bootsect

- a Windows XP instalation CD or image

Extract all the zip archives, copy the PeToUSB content into the USB_prep8 folder. Inside the USB_prep8 folder double click the executable named usb_prep8.cmd

The window that opens will look like this:

Click to enlargePress any key to continue.

Your next window will look like this:

Click to enlargeThese settings are preconfigured for you and all you need to do now is click the Start button.

Once the format is complete, DO NOT close the window. Just leave everything as it is and open a new command prompt from your start menu (type cmd in the Run box)

Inside the command window, go to the directory you have bootsect.exe extracted and type (see note bellow first)

bootsect.exe /nt52 R:

Note: R: is the drive of my USB stick. Open Windows Explorer and see what letters yours is assigned to and change the command accordingly. When running the bootsect.exe command, you must close all windows/programs that are displaying/using the content of the USB stick to allow the boot sector writer to lock the device and write the sector correctly.

This part writes the correct boot sector to your USB stick and allows the pc to boot from the stick. Without this noting works.  If all went well with the command, you should see "Bootcode was successfully updated on all targeted volumes"

Now you can close this command prompt and the PeToUSB window (but make sure not to close the usb_prep8 one by mistake)

The window you see now should look like this:

Click to enlarge

Now you need to enter the correct information for number 1, 2 and 3

- Press 1 and then enter. A folder browse window will open for you to browse for the location of your XP setup files (cd rom drive, mounted image or a folder somewhere on your system)

- Press 2 and enter a letter not curently assigned to a drive on your PC (try x or someting at the end of the alfabet)

- Press 3 and enter the drive letter of your USB stick

- And finally, press 4 to start the process

The script will ask you if its okay to format the virtual tempdrive (the one at step 2). This is just a temp drive the program creates and mounts to cache the windows installation files. You can safely press Y to continue

Once it's done formating, press enter to continue again, you can now see the program copying files to the temp drive it created. This will take a while (browse other articles from my blog till then :) ) but once this is done, press enter to continue again.

Next you will see a box pop up asking you to copy the files to USB drive (yes/no options). You want to click yes here.

Once the script has completed once again a shit long copying process, another window asking if you would like the USB drive to be preferred boot dive U:. select Yes on this window too.

Now select yes to unmount the virtual drive.

Ok we are done the hard part, close the usbprep8 window.

Now make sure your EEE pc is configured with USB as the primary boot device.
Insert your USB drive and boot up the EEE.

On the startup menu you have two options, select option number 2 for text mode setup.

From this point on it is just like any other windows XP installation delete/recreate the primary partition on your EEE pc and format it using NTFS. Make sure you delete ALL partitions and recreate a single partition or you will get the hal.dll error message.

Once the text mode portion of setup is complete it will boot into the GUI mode (you can press enter after the reboot if your too excited to wait the 30 seconds)

Once the GUI portion of setup is complete you will again have to boot into GUI mode this will complete the XP installation and you will end up at you XP desktop. It is very important that you DO NOT REMOVE THE USB STICK before this point. Once you can see your start menu it is safe to remove the usb stick and reboot your pc to make sure everything worked.

This method has advantages over all current no cdrom methods of installing XP to the EEE. You do not have to copy setup files in DOS to the SSD and install from there. It gives you access to the recovery console by booting into text mode setup, and it gives you the ability to run repair installations of XP if you have problems later on.

I hope this worked out for you and please post feedback to the comments section.

xpinstall

Comments (0) Trackbacks (1)
  1. I don’t see this “On the startup menu you have two options, select option number 2 for text mode setup.” because my screen is black and blink after I chose to select USB stick.
    Please help me????

  2. @Olivian
    You have to enter BIOS and make it boot from USB, and when it boots, if you made your usb stick corectly it should display a small menu with Start Windows setup in text mode and Start Windows setup in GUI mode. but as i said, only if you made your usb stick right

  3. Now appear me this option but in few seconds appear me a error like this: windows root system32/hal.dll

  4. @admin
    If I’m quickly and press 2 then he ask me to put manualy another kind of equipment.

  5. thank you very much for all your support.

  6. I love this article. I use it for my thinkpad x32 (doesn’t have a disk drive) all the time. Thanks for this. Great job.

  7. You can also do this with Windows 7 and use an autounattend.xml file to make the installation completely automatic. Here is the Microsoft Technet article for that: http://technet.microsoft.com/en-us/library/cc749415%28v=ws.10%29.aspx

  8. Hi. I tried it and it does not work. Shows blue screen and the error text: *** STOP: 0x0000007B (0xF7AEC524, 0xC0000034, 0x00000000, 0x00000000). I’m doing wrong? Thanks!

  9. HELP NEEDED!
    I’m trying to install XP on my Eee PC. I did it 3 times but I didn’t succeed.
    Starting PeToUSB before ending formatting USB key I get error message: FormatEX Error [9]: Another process has open file(s) on this drive.

  10. thanks you, it was slow, but it works :)
    Try to create the usb in the same operative system that you want

  11. I do not create many responses, but I read a few of the comments on this
    page Install Windows XP on your Asus Eee PC using a USB flash
    drive
    rozliczenie pit online recently posted..rozliczenie pit onlineMy Profile


Reply

( Cancel )

CommentLuv badge

*